• Giỏ hàng của bạn (1 sản phẩm)

  • sHOWROOM Số 08 Hai Bà Trưng, HN

    Tel: (84-4) 3944.6878

    sHOWROOM Số 08 Hai Bà Trưng, HN

    Tel: (84-4) 3944.6878

    Tư vấn Hi End:

    Mr. Công: 0912 186 368

    Tư vấn âm thanh sân vườn karaoke:

    Mr. Trường: 0977 127. 697

    Tư vấn Hi End và home cinema:

    Mr. Huy: 0912. 816. 315

    Bảo hành:

    Mr. Trường: 0977 127. 697

    Tư vấn Hi Fi và home cinema:

    Mr. Hưng: 0917. 399. 899

  • Power Supply Nagra MPS
  • Power Supply Nagra MPS
  • Power Supply Nagra MPS
  • Power Supply Nagra MPS
  • Power Supply Nagra MPS
  • Power Supply Nagra MPS

Power Supply Nagra MPS

The Nagra MPS is a multiple power supply designed to power up to four Nagra units at once, as well as the BPS compact phono preamplifier. The Nagra MPS power supply comes in a stand-alone aluminium case which adopts the same size and form as the brand’s other electronics. Particularly useful for use with the HD DAC, which requires two power supplies, the MPS offers constant noiseless power for multiple elements. Specially intended for the BPS and VPS phono stages, an optional Li-ion battery can be installed on one output to deliver a pure power source.

Giá: Liên hệ

đăng ký nghe thử

Performance

This multiple power supply goes as far as technology currently allows in terms of silent running, stability and dynamic performance. It enables the equipment connected to it to increase their overall musicality, giving rise to an even more realistic reproduction, alive and detailed, creating a full soundstage.

Circuit design

The Nagra MPS power supply circuits are based around an oversized transformer, designed and hand-made by Nagra, whose four outputs are galvanically isolated. The unit benefits from massive filtering thanks to its high capacity condensers which completely isolate it from the ever increasing disturbances to which the mains is prone.

Optional Li-ion battery

Each output possesses its own ultra low noise regulatory circuit which ensures perfect voltage stability under all circumstances. One of the outputs (No. 1) has also been designed to accept an optional rechargeable battery in order to power a phono preamplifier such as the Nagra VPS, for example, in total silence, the unit being completely isolated from the mains.

Ergonomics

The Nagra MPS power supply’s front panel features a display where the user can choose to show the mains voltage, the voltage of each output and the state of the battery charge if relevant.

Remote control and automation

The MPS power supply can be switched on via a Nagra remote control. It comes with input and output triggers which can be run by a home automation system, so that in conjunction with an appropriate device, the unit can be switched on remotely by telephone, for instance. The home automation loop can also be used to switch on other elements of the hi-fi system.

thông số

Compatibility:   Nagra BPS, VPS, PL-L, MELODY, JAZZ, CDC, CDP, CDT, HD DAC
Outputs:   N° 1 with Lemo connector 12 VDC, 1A, as well as DC connector for the BPS.The optional Li-ion battery will feed this output. N° 2 to 4 with Lemo connectors 12 VDC, 1A
Optional Li-ion battery operation time:   CD range 11 hours

VPS, PL-L, JAZZ 7-8 hours

MELODY 50 hours

BPS 100 hours

Home automation input and outputs:   3.5mm jack connectors, output switched by relay (max 1A).
Mains supply:   100, 115 or 230 VAC, ±10%
DC cables :   Custom made shielded cable with high quality Lemo connectors, available in 0.75 or 1.25m lengths. Other lengths available on request.DC cable for the BPS, 1m.